Posts: 1,335
Threads: 141
Joined: Jul 2006
Hi folks, what are people doing for angle drives these days?
I need to examine in more detail but I think mines on its way out.
Richard Hanlon
Derbyshire
DOC 393
1981 DMC-12 VIN 06126
Posts: 1,746
Threads: 119
Joined: Aug 2009
What's the giveaway? Speedo bounce?
If it's not actually snapped, then now is the time to take it off the car and assess. It may just need some attention to clean it up and regrease it etc.
Rissy
(Forum Member 288)
(DOC Member 663)
May 1981 vin#1458 "LEX"
Grey, Flapped, Black
Chassis: #1073
Engine: #2839
Main Car(s):
2005 BMW M3 in Velvet Blue
2010 Honda Civic Type R in Sapphire Blue (1 of 115 made)
Posts: 338
Threads: 23
Joined: Sep 2017
(19 Nov 2023, 00:40)Rich Hanlon Wrote: Hi folks, what are people doing for angle drives these days?
I need to examine in more detail but I think mines on its way out.
think mine is still okay but still need to remove it from the hub since I've gone the GPS speedbox route so if I can get it off and it works you can have mine if needed
Posts: 1,335
Threads: 141
Joined: Jul 2006
Thanks both. Yes, bounce but occasionally drops out altogether. I need to investigate further. I *think* I can hear squeaking coming from the lambda count while the speedo is registering but its on the limit of my hearing. I need to try to replicate with a drill with the car static. If my just been either of the speedo cables lubing.
Thank you for the offer Will, much appreciated.
At one time one of the vendors was doing one which was way out of calibration. Not sure what the current thinking is...
Richard Hanlon
Derbyshire
DOC 393
1981 DMC-12 VIN 06126
Posts: 1,746
Threads: 119
Joined: Aug 2009
Sounds like it’s more likely the dust cap slipping in the hub. I’d check there first, but I’d still go for a disassembly and relube etc and put back together again and see if there’s an improvement. If it’s intermittent then at least your cable hasn’t snapped, but friction maybe increasing, causing the dust shield to be slipped round by the cable instead of holding it still.
Rissy
(Forum Member 288)
(DOC Member 663)
May 1981 vin#1458 "LEX"
Grey, Flapped, Black
Chassis: #1073
Engine: #2839
Main Car(s):
2005 BMW M3 in Velvet Blue
2010 Honda Civic Type R in Sapphire Blue (1 of 115 made)
Posts: 4,525
Threads: 812
Joined: Jul 2006
I have Harvey's one (specialT auto) and that's way off but works. I believe all the offerings are the same now (as in all off)!
Posts: 6,169
Threads: 346
Joined: Jul 2006
About 14 years ago, we had them remanufactured by Speedograph Richfield
in Nottingham (who made them originally), however they stopped doing them
when the old chap who made them retired, and they also got quite grumpy about
honouring warranties on them if they failed, and basically said they weren't going
to do them anymore.
I am aware of other vendors selling them at various prices since, but I'm not sure
how reliable they have been.
Claire Wright - Club Treasurer
Jul 1981 DeLorean - Flopsy #2292
Aug 1989 Cavalier 1.6L - Guinney
Apr 2021 Mokka-e Launch Edition - Evie
#170