Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
is there a parts cross ref for the aircon belt?
#1
Hi

i know it must be here somewhere, but its about time i tried to power up the aircon.

does anyone know a reference?.

thankyou
Steve Saunders
Wolverhampton
ex owner vin 1621
doc 370
Reply
#2
It's on here Steve if you've got a motoquip stockist close by....

http://www.deloreans.co.uk/forum/viewtopic.php?t=735

Or try this....

http://stits.org/DMCVEGAS%20DMC%20Archi ... X-Over.HTM

Regards
Reply
#3
The Correct sized Aircon belt is 10mm x 1350mm

Gates 6234MC
Regards,

Chris Hawes
DOC 138
Vin 5255 Grey, 5-speed
Reply
#4
that's good to know Chris, mine started smoking last year when one of my AC pulleys
seized - luckily I was able to cut the belt off, and at some point in this millennia I will
get around to changing the pulleys and the belt Smile
Claire  - DOC-UK Treasurer
1981/W DeLorean DMC-12 'Flopsy' - #2292 - resting due to block rot 
1989/G Vauxhall Cavalier 1.6L 5dr "Guinney" -
1995/N Renault Espace RT Alize 2.1TD "Jaffa the Bus"
DOC170
Reply
#5
Chris Hawes Wrote:The Correct sized Aircon belt is 10mm x 1350mm

No it isn't because the correct belt is 12mm or 1/2" wide.

10mm belts work for a short while but they "bottom out" on the pulley and start squeaking.
Martin Gutkowski
DeLorean Cars
http://www.delorean.co.uk
Reply
#6
right........ glad I havent rushed out to buy one then! lol
Claire  - DOC-UK Treasurer
1981/W DeLorean DMC-12 'Flopsy' - #2292 - resting due to block rot 
1989/G Vauxhall Cavalier 1.6L 5dr "Guinney" -
1995/N Renault Espace RT Alize 2.1TD "Jaffa the Bus"
DOC170
Reply
#7
I got fed up with 10mm belts keep snaping on me,so I put a 12mm on and had no trouble's since.
Cheers
Martyn Reed
D.O.C#491
EX Vin# 6064
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)