Posts: 1,232
Threads: 35
Joined: Jul 2006
Guinney1971 Wrote:the ones that were fitted on Flopsy were the original 'prototype' ones that you and Dave
had made in the early days of DMUK.
I've had no issues with the OEM hoses that are back on my car,
If you did change out your injector hoses, then there was no reason to. You can tell them apart by the collar next to the banjo fitting, and that the outer sheath is firmly fixed to the banjo rather than being a flimsy rubber shroud.
Andy Snell recently had a full set from me for his new car. He also fitted a set to the explodaview car. Others like Arran Jamieson have been running them for several years now too.
Posts: 6,169
Threads: 346
Joined: Jul 2006
I'll have to find the picture of the hose that went - I seem to recall it was spraying fuel
out of the crimped bit.
Maybe I just had a 'Friday afternoon hose'. :roll:
Claire Wright - Club Treasurer
Jul 1981 DeLorean - Flopsy #2292
Aug 1989 Cavalier 1.6L - Guinney
Apr 2021 Mokka-e Launch Edition - Evie
#170
Posts: 6,169
Threads: 346
Joined: Jul 2006
Guinney1971 Wrote:I'll have to find the picture of the hose that went
found them - looks like the fitting itself failed - this was in June 2006, so the hoses had been
on the car for about 3yrs at this point.
close up
Claire Wright - Club Treasurer
Jul 1981 DeLorean - Flopsy #2292
Aug 1989 Cavalier 1.6L - Guinney
Apr 2021 Mokka-e Launch Edition - Evie
#170
Posts: 1,232
Threads: 35
Joined: Jul 2006
That's unacceptable - I'll take this up with A1. Can you send it to me?
Sorry for being pedantic - I thought you meant one with the rubber hose.
Posts: 6,169
Threads: 346
Joined: Jul 2006
bit late Martin, I binned it - but it was over 3yrs ago now.
Thanks for the offer of sorting it out tho
Claire Wright - Club Treasurer
Jul 1981 DeLorean - Flopsy #2292
Aug 1989 Cavalier 1.6L - Guinney
Apr 2021 Mokka-e Launch Edition - Evie
#170
Posts: 233
Threads: 62
Joined: Jul 2006
I bought a whole host of spare fuel cables when I had troubles a couple of years back, both updated OEM from Ed and Stainless from JohnH.
If you can confirm the part numbers I'll take a look.
JohnC
Posts: 1,232
Threads: 35
Joined: Jul 2006
Actually, I have Rich's replacement hose here, which he has sent me Paypal for. The prob is it didn't come with his address and I can't get hold of him.... Rich - can you (or someone who knows) drop me your address please?
The hose in question is the low pressure one that attatches to the base of the frequency valve. Originally part of the frequency valve itself and unavailable seperately, unless you make your own.
Freq valve pn is 102395 although the funny thing is that the photo on Houston's website shows it without the hose. It -is- just an injector with no nozzle.
Posts: 1,335
Threads: 141
Joined: Jul 2006
Hi Martin, PM sent. I texted you this the other day but it must have got lost in the ether somewhere.
Rich
Richard Hanlon
Derbyshire
DOC 393
1981 DMC-12 VIN 06126
Posts: 1,232
Threads: 35
Joined: Jul 2006
I got a text from you this morning :lol:
In the post first class tomorrow morning.
Posts: 1,335
Threads: 141
Joined: Jul 2006
Thanks Martin, got the hose yeterday morning. Looks great, will fit it this weekend...
Richard Hanlon
Derbyshire
DOC 393
1981 DMC-12 VIN 06126