08 Aug 2018, 15:08
Hi all - got my refurbished clutch master back from past parts and put it back on the car over last weekend. All is working well!
I found the easiest way for me to bleed the system was to take the engine cover off and go in from the top - I could see it and get an 8mm spanner on there.
This is the cylinder after I got it back - also got a seal for the reservoir cover:
[attachment=375]
I found the easiest way for me to bleed the system was to take the engine cover off and go in from the top - I could see it and get an 8mm spanner on there.
This is the cylinder after I got it back - also got a seal for the reservoir cover:
[attachment=375]