The DeLorean Owners Club UK Forum
Couple of questions.... - Printable Version

+- The DeLorean Owners Club UK Forum (http://www.deloreans.co.uk/forum)
+-- Forum: DELOREAN HELP AND ADVICE & PARTS CROSS REFERENCE (http://www.deloreans.co.uk/forum/forumdisplay.php?fid=4)
+--- Forum: 3 - Electrical (http://www.deloreans.co.uk/forum/forumdisplay.php?fid=15)
+--- Thread: Couple of questions.... (/showthread.php?tid=3585)



Couple of questions.... - Chris Williams - 29 Aug 2012

OK, two questions please. I have done it before using instructions supplied on I think the old DML forum but now cant find it, how do I make the front Amber running lights flash?? I know it's simple but cant remember!

2, The A/C fuse (fuse 10) keeps blowing, have not had chance to mesure anything as yet other than disconnecting the A/C compressor (made on difference) , any ideas as to where to start to save me a bit of time?
Ta

Chris


Re: Couple of questions.... - Rissy - 29 Aug 2012

http://www.dmcnews.com/Techsection/markerflash.html


Re: Couple of questions.... - Chris Williams - 29 Aug 2012

Quote:http://www.dmcnews.com/Techsection/markerflash.html
Thanks Rissy, thats the one, just could not find it! I have a feeling that I have caused the other fault by fiddling about installing LED's perhaps time to start reverse installing!
Chris


Re: Couple of questions.... - stunned_monkey - 29 Aug 2012

The marker mod does require the use of a bulb rather than an LED because the connection is effectively reversed.


Re: Couple of questions.... - Rissy - 29 Aug 2012

stunned_monkey Wrote:The marker mod does require the use of a bulb rather than an LED because the connection is effectively reversed.


In the front or the side light?

I've had LED's in the side markers in the past, and they worked, but were very dim, so currently am still running incandescent. I bought so new fancy "powerful" LED's for these, and they just didn't work at all. I'm now wondering if this is the reason why. Although with the side lights on, and the bulb lighting, and then removing to put in an LED, I would have expected the LED to simply work too!?


Re: Couple of questions.... - stunned_monkey - 29 Aug 2012

The link above comtains an explanation of the polarity the bulb "sees" when this mod is present.


Re: Couple of questions.... - Chris Williams - 29 Aug 2012

I have to admit I did try LED's in my old car in the marker lights and was never happy with them so I went back to normal bulbs.
However the fuse blowing still remains :roll:
Chris


Re: Couple of questions.... - Chris Williams - 06 Sep 2012

Quote:The A/C fuse (fuse 10) keeps blowing, have not had chance to mesure anything as yet other than disconnecting the A/C compressor (made on difference) , any ideas as to where to start to save me a bit of time

As an FYI really, this turned out to be a connection that had dropped off the back of the mode switch!

Chris