+- The DeLorean Owners Club UK Forum (http://www.deloreans.co.uk/forum)
+-- Forum: GENERAL DELOREAN DISCUSSION (http://www.deloreans.co.uk/forum/forumdisplay.php?fid=2)
+--- Forum: General Discussions on the DOC / Car / Company / JZD (http://www.deloreans.co.uk/forum/forumdisplay.php?fid=25)
+--- Thread: Mulling over the idea of coming back to DMC ownership.... (/showthread.php?tid=2405)
Mulling over the idea of coming back to DMC ownership.... - Dan Willis - 28 Jul 2009
Hi all,
Some of you know me, some not so much. I used to own Maddie and Hana - and recently, more so than usual, I've been hankering after those gullwings again. It comes as a job change and lifestyle change and I'm thinking that after nearly four years of Monaro ownership that it might be time to move on - however, I hadn't bargained on the market being so... "bouyant" regarding DeLoreans.
I'm really after a project (again) - still not loving the crappy PRV (yeah it's my opinion, live with it
) so I may still go small-block chevy. It'll be finding the car that I think might put me off!I know things have changed now though - what with PJ over here and lots of engine and aftermarket stuff becoming available so I guess I need to do my homework before I start looking - the whole "All DeLoreans are £20k DeLoreans" still stand?
Cheers all!
Dan
Re: Mulling over the idea of coming back to DMC ownership.... - Guinney1971 - 28 Jul 2009
ayup Dan, go on mate, you know you want to!! :lol:
I guess, depending if you do the work yourself, or get someone else to do it, then the
analagy of the £20k DeLorean is about right.
I'd been toying with the idea of fitting a supercharger, as I'm not keen on turbo's, but then
again I thought to myself, if I want to drive a really fast car, then there are plenty at work
to choose from. A small block V8 would certainly sound nice tho! :wink:
I've come to realise, over the years, that what attracts 'joe public' to DMC's are the way
they look, and the iconic story surrounding them.
Nice to hear from you again
Re: Mulling over the idea of coming back to DMC ownership.... - Dan Willis - 28 Jul 2009
Hey Claire,
Nice to read from you
So whilst things have changed, they're still the same. Good. I still remember most of the gumph from previously - I'm hankering after a LS1 (cheap as chips) or LS2 in one. Have to see if the frame'll break clean in half though :p
Well, I'll keep looking. Too many nice cars out there that can't be butchered
Dan
Re: Mulling over the idea of coming back to DMC ownership.... - Guinney1971 - 28 Jul 2009
lol, well I think there's still a few project cars lurking over the other side of the pond, but
I dont think theres any such thing as a cheap project car anymore.
Chris N can always fix the frame up for you - and Dave Howarth has got an auto
frame for sale. Has Ed Uding in Holland got a project car he could sell you?
Re: Mulling over the idea of coming back to DMC ownership.... - Dan Willis - 28 Jul 2009
Oh I'm not expecting "cheap" per say - but I'd rather not buy a mint car for £20k then rip the guts out and hack the frame up
You know - save one, and make it my own.... Ed had a few nice cars, but nothing I'd butcher.
Re: Mulling over the idea of coming back to DMC ownership.... - steve-mac - 28 Jul 2009
hi Dan
dont know if this is any good,there is a red DMC12 for sale on e-bay buy it now for $9000 US it is equiped with a 1984 Chevy Vortec 4.3 liter
Re: Mulling over the idea of coming back to DMC ownership.... - Chris Williams - 28 Jul 2009
Hi Dan
How much power are you looking for?? Although I have not put the figures up yet I think mine was 152hp (118 at the wheels) and I suspect there is more to come with a bit more tweeking and a performance exhaust. Although I have been looking into superchargers also but wanted to keep the stock look so that rules this out really (plus the cost!)
Are are you looking for much more than this?
Chris
Re: Mulling over the idea of coming back to DMC ownership.... - Dan Willis - 28 Jul 2009
Yeah, quite a bit more! Lol - my Monaro puts 340hp down at the wheels (440 at the crank) so I figure something near the "normal" 5.7's 250hp at the wheels would be fun. I'm actually more interested in the sound and torque to be honest.
Re: Mulling over the idea of coming back to DMC ownership.... - Dan Willis - 28 Jul 2009
steve-mac Wrote:hi Dan
dont know if this is any good,there is a red DMC12 for sale on e-bay buy it now for $9000 US it is equiped with a 1984 Chevy Vortec 4.3 liter
Just had a look - it's red and an automatic - the gearbox isn't really a problem but I'd rather not have to restore the body (being an unknown quantity). Still, could be worse!
Re: Mulling over the idea of coming back to DMC ownership.... - Guinney1971 - 28 Jul 2009
gotta admit Dan, I'm a sucker for the noise a V8 makes
Would you source a V8 engine over here or in the states? Might make sense to buy an
engine over there, and have it shipped over in the same container as the car?
Re: Mulling over the idea of coming back to DMC ownership.... - Dan Willis - 28 Jul 2009
I have no real preference - there are some great places in the US to crate-build SBC engines (one is used by Ultima) so the sky is the limit. It's all just an idea at the moment - I may never find the car!
Re: Mulling over the idea of coming back to DMC ownership.... - stunned_monkey - 29 Jul 2009
Hi Dan
A Chevvy V8 won't fit, a V6 does (just) and bellhousings are avalable from GTO, as are uprated gearsets.
I've got a project which we can talk about if you'd like to get in touch. I'm more active on the other forum though.
Re: Mulling over the idea of coming back to DMC ownership.... - Guinney1971 - 29 Jul 2009
What about that car in the US that had 2 engines - wasn't it a Honda engine in the front
and a Chevvy in the back? I know it was mental, whatever it was! lol :lol:
V8's sound the mutts nuts compared to V6's Dan, I'd love to see you put one in a De
Re: Mulling over the idea of coming back to DMC ownership.... - Dan Willis - 29 Jul 2009
stunned_monkey Wrote:Hi Dan
A Chevvy V8 won't fit, a V6 does (just) and bellhousings are avalable from GTO, as are uprated gearsets.
I've got a project which we can talk about if you'd like to get in touch. I'm more active on the other forum though.
Why won't a SBC fit? If a Northstar does and an SBC being one of the most compact, I'd be surprised - I assume it's to do with the sump rather than the actual block and heads? That can be remedied with a dry setup easily enough. Oh, and Rover and Lotus V8s fit too!
Re: Mulling over the idea of coming back to DMC ownership.... - Guinney1971 - 29 Jul 2009
Dan Willis Wrote:stunned_monkey Wrote:Hi Dan
A Chevvy V8 won't fit, a V6 does (just) and bellhousings are avalable from GTO, as are uprated gearsets.
I've got a project which we can talk about if you'd like to get in touch. I'm more active on the other forum though.
Why won't a SBC fit? If a Northstar does and an SBC being one of the most compact, I'd be surprised - I assume it's to do with the sump rather than the actual block and heads? That can be remedied with a dry setup easily enough. Oh, and Rover and Lotus V8s fit too!
mwuhahahhaaaaaaaaaaaaa - I can see a Dan Willis Special Monster DeLorean ...... :wink: :wink: