Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Track Rod Ends
#1
Anyone got the cross Ref for the track rod ends please
[Image: DeloreanSig.jpg]
Reply
#2
Track Rod End 136600 (Triumph)

(Courtesy of Dan Shanes X Ref List)
Reply
#3
Cheers Mike
[Image: DeloreanSig.jpg]
Reply
#4
careful with these triumph ones as they may need to be chopped slightly if the threaded part is too long. You may find this out at tracking time.

Let's hope not.

Good luck.

NickT.
Reply
#5
They are from triumph herald but the Quentin Hazel ones are not threaded far enough down the shaft for the DeLorean application..dont ask how I found that one out :lol:
Chris Spratt

Ex owner of Vin#16327 Grey 5 Speed was FLE 371Y
1998 Lotus Esprit GT3
1999 Lotus Elise
DOC 4
Reply
#6
Is there a cross reference for ones that dont need chopping about? as I'd like to change mine this week as the boots are split and its up on axle stands anyway at the moment.
VIN: 6511
Reply
#7
Hi Dan,

Got mine from DMCH, cheap as chips and no chopping about. Delivery 3 days DHL. Big Grin

Best Regards
D
VIN 4532

DOC-574
Reply
#8
Dan1986 Wrote:Is there a cross reference for ones that dont need chopping about? as I'd like to change mine this week as the boots are split and its up on axle stands anyway at the moment.

I only had to hacksaw about 5-6mm off the ends to ensure they fitted ok for tracking.
Chris
Membership Secretary DOC UK
2021's DeLorean event: http://www.deloreans.co.uk/forum/showthr...p?tid=6056
VIN#15768 Ex VIN#4584
Reply
#9
Thanks guys its all done now. I bought triumph ones and cut the lip off the end using my band saw and they fit perfect now Big Grin
VIN: 6511
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)