Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Luke's BTTF Car Based In Leeds, West Yorks
yikes they are pricey - and thats before I looked at shipping.....
Claire Wright  - Club Treasurer
Jul 1981 DeLorean - Flopsy #2292 
Aug 1989 Cavalier 1.6L - Guinney
Apr 2021 Mokka-e Launch Edition - Evie
#170
Reply
Guinney1971 Wrote:yikes they are pricey - and thats before I looked at shipping.....

Eh? Only $10 each?
http://www.deloreanhire.com
http://www.fusiontimetravel.co.uk

Ex 1981 DMC Delorean Time Machine owner.
Reply
www.youtube.com/watch?v=sNGm7te6qdU&fea ... ata_player


LOL Smile
http://www.deloreanhire.com
http://www.fusiontimetravel.co.uk

Ex 1981 DMC Delorean Time Machine owner.
Reply
lukebrynycz Wrote:
Guinney1971 Wrote:yikes they are pricey - and thats before I looked at shipping.....

Eh? Only $10 each?


I saw summat at over $30
Claire Wright  - Club Treasurer
Jul 1981 DeLorean - Flopsy #2292 
Aug 1989 Cavalier 1.6L - Guinney
Apr 2021 Mokka-e Launch Edition - Evie
#170
Reply
Guinney1971 Wrote:
lukebrynycz Wrote:
Guinney1971 Wrote:yikes they are pricey - and thats before I looked at shipping.....

Eh? Only $10 each?


I saw summat at over $30

Ah right, may have been another of his shirts. I suppose with import tax and royal mails handling fee, it would be quite steep!
http://www.deloreanhire.com
http://www.fusiontimetravel.co.uk

Ex 1981 DMC Delorean Time Machine owner.
Reply
Another update for those interested! Stock purists, look away now. :wink:

Couldn't have done this without the expertise/knowledge of Mr Bozzy, so first off, cheers mate 8-)




So first thing's first, a quick photo of the previous wiring. It was absolutely fine and did the job, but I liked the deeper colours of the screen used car and the hose was a little on the small side, so we went to work!
[Image: IMG_20140208_083444.jpg]




Then we started to remove the old wiring, hose, and clamps.
[Image: IMG_20140208_092025.jpg]
[Image: IMG_20140208_092543.jpg]





Then we realised that some of the screws were different sizes, so off to B&Q to get a fresh pack of self tappers and some more cable ties, as I had underestimated how many we would need!



Back to work. Removing the side wires and cleaning up under those areas that can't normally be.
[Image: LdwGOEjDjFZTxaMOvMUFpp67w2CtKhip6Jgp3i-g...02-h527-no]




Our first attempt at getting the angle right on the flux box hose.
[Image: IMG_20140208_110654.jpg]




First hose in loosely.
[Image: IMG_20140208_111133.jpg]




First set of wires attached to make one side complete! Brew time :thumbsup:
[Image: IMG_20140208_164036.jpg]




Then off to the sides.
[Image: IMG_20140208_153445.jpg]




Then I noticed the clamps on the rear deck under the struts. Off they come to access and replace these 3.
[Image: IMG_20140208_160854.jpg]




New clamps on this area and struts attached back on. Just need to replace that thin split hose with some thicker non split soon.
[Image: IMG_20140208_162839.jpg]




Then onto the rear. The current hose and wires were cable tied to some exhaust brackets. Purists, look away, Mr Drill wants to come play! Wink
[Image: IMG_20140208_165907_1.jpg]




We then used some reference photos of the A car to get the clips, hose, and wiring in the right place. They had to be slightly out due to the film car having the flux boxes higher and the exhaust venting out the side, but I'm more than happy with this! :thumbsup:
[Image: IMG_20140208_193543.jpg]




A couple more to the interior!
[Image: IMG_20140208_200958.jpg]




Why not add a bit of Vivaaaaaaa Las Vegas to the finishing shot? Wink
[Image: IMG_20140208_204256.jpg]




Oh, and for the keen eyed, yes the purple p-clips don't have slotted clamps, that's on purpose. I had the originals (cheers mate) but as you can see from this photo, they squash and lose their shape when fully clamped, and also don't have UV protection like these ones do. Also, the wedge is better positioned to have a cleaner finish.
[Image: IMG_20140208_194346.jpg]
http://www.deloreanhire.com
http://www.fusiontimetravel.co.uk

Ex 1981 DMC Delorean Time Machine owner.
Reply
Top work fellas... If anyone can get the right tool for the job, it's Bozzy!....

Us DeLorean purists appreciate a knowledgeable person/persons with good tools ;-)....

Send Regards from Mr P next time you see him Luke... :-)
Reply
TheOriginalMrP Wrote:Top work fellas... If anyone can get the right tool for the job, it's Bozzy!....

Us DeLorean purists appreciate a knowledgeable person/persons with good tools ;-)....

Send Regards from Mr P next time you see him Luke... :-)

Cheers Ben! He sure does. I look forward to helping him with him motor this summer too, I owe him a few days of my time.

Will text him now for ya Smile
http://www.deloreanhire.com
http://www.fusiontimetravel.co.uk

Ex 1981 DMC Delorean Time Machine owner.
Reply
http://www.youtube.com/watch?v=cXtWSl2zR8s

Too funny!
http://www.deloreanhire.com
http://www.fusiontimetravel.co.uk

Ex 1981 DMC Delorean Time Machine owner.
Reply
I see what you mean about looking away..... screws into the stainless and interior panels Cry

But its your car, and it will never be returned to stock (I expect), so fair play matey, and I have
to say your car looks great and I cant wait to see it this year hopefully Smile
Claire Wright  - Club Treasurer
Jul 1981 DeLorean - Flopsy #2292 
Aug 1989 Cavalier 1.6L - Guinney
Apr 2021 Mokka-e Launch Edition - Evie
#170
Reply
Guinney1971 Wrote:I see what you mean about looking away..... screws into the stainless and interior panels Cry

But its your car, and it will never be returned to stock (I expect), so fair play matey, and I have
to say your car looks great and I cant wait to see it this year hopefully Smile

I wouldn't have ever drilled the first hole, but since it already had lots anyway... a few more won't harm! Smile You would never turn one of these back to stock when done like this. If they lost value I could sort of understand the concern, but with the popularity of BTTF, they never will which is nice. Regardless of any monetary thoughts, I would have got one any way as I had my heart set it on for years.

You sure will this year. If you wanted a day out with the kids and wanted to pop over, give me a shout any time! 8)
http://www.deloreanhire.com
http://www.fusiontimetravel.co.uk

Ex 1981 DMC Delorean Time Machine owner.
Reply
totally agree, and BTTF cars will always be popular, especially when they are done as
accurately as yours.
Claire Wright  - Club Treasurer
Jul 1981 DeLorean - Flopsy #2292 
Aug 1989 Cavalier 1.6L - Guinney
Apr 2021 Mokka-e Launch Edition - Evie
#170
Reply
Guinney1971 Wrote:totally agree, and BTTF cars will always be popular, especially when they are done as
accurately as yours.

You're too kind Claire :wink:

Looks like the weather is picking up, looking forward to some car shows this year!
http://www.deloreanhire.com
http://www.fusiontimetravel.co.uk

Ex 1981 DMC Delorean Time Machine owner.
Reply
[Image: DSCN0195.JPG]

[Image: DSCN0209.JPG]

[Image: DSCN0272.JPG]

I decided to get the shots I'd be wanting to do for a while. Wink
http://www.deloreanhire.com
http://www.fusiontimetravel.co.uk

Ex 1981 DMC Delorean Time Machine owner.
Reply
Great shots.......shame about that ugly fella getting in the way though.... lol :wink:
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)