Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
what size banjo bolt fuel line to distributor
#1
Hi does any one know what size the banjo bolts is at the end
of the fuel line that connects to the fuel distribution unit?.

is there anyone in the UK with these?, as seems points to make a $2 order with delorean.com.

thankyou

Steve
vin 1621
Steve Saunders
Wolverhampton
ex owner vin 1621
doc 370
Reply
#2
Don't know off the top of my head, but I can send you one if you need.
Richard H. DOC 365 VIN 1274
http://www.deloreans.co.uk
In theory, theory and practice are the same. In practice, they are not.
Reply
#3
hi

thankyou...have you nos?.

i could paypal over some £££'s for it!.

mine has been tightened and the hexagonal bit is slightly damaged so wil not seal so i have a bit of petrol leaking out. have changed the copper washers (but they are a bit wide and i don't think the fit is great.

so i thought i would change the banjo bolt and washers. the fuel line is fairly new.
trying to sort for the MOT!

thanx

Steve
vin 1621
Steve Saunders
Wolverhampton
ex owner vin 1621
doc 370
Reply
#4
They are the larger size for that fitting, 12mm I think

I have a good used one I can send you. Do you have copper washers?
Richard H. DOC 365 VIN 1274
http://www.deloreans.co.uk
In theory, theory and practice are the same. In practice, they are not.
Reply
#5
14mm
Reply
#6
sorry here is an update.

i managed to locate a diesel place a mile from the office and purchased a 14mm bolt.

but just gone to the car to fit and it is 12mm !.

so back in the morning to try and change it.

the old one is definately no good.

thankyou for all your help, and hopefully in the morning i can get the 12mm one.

Regards

Steve
Steve Saunders
Wolverhampton
ex owner vin 1621
doc 370
Reply
#7
Sorry Steve, I thought you meant the other end of the pipe that goes on the CPR.

Glad you got one anyway. I have a small box full of banjo bolts collected over the years.

Nick.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)