Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Exhaust Gaskets M7 Studs and Nuts
#1
Has anyone got a good source for these pieces please

Regards

Mike
Reply
#2
Does this mean your custom stainless system has arrived?
VIN: 6511
Reply
#3
Try DMCH,

Items 18 & 20 on Engine Exhaust parts list,

Studs $1.99 each (a quid)
Gaskets $9.99 each (a fiver)

Even with tax that's cheap as chips and original DMC stock.

Best Regards
D
VIN 4532

DOC-574
Reply
#4
bozzzydmc Wrote:Has anyone got a good source for these pieces please

Regards

Mike

If it's any good to you I have a few S/H ones you can have.

Chris
Membership Secretary DOC UK
2021's DeLorean event: http://www.deloreans.co.uk/forum/showthr...p?tid=6056
VIN#15768 Ex VIN#4584
Reply
#5
[Image: 1-5-0.gif]

Is part 18 the m7 stud or one of the m10 studs that holds the cross over pipe ??

Not sure thats the right one but buggered if i can see 12 no studs on the page
Reply
#6
Dan1986 Wrote:Does this mean your custom stainless system has arrived?

Will be here soon just trying to be prepared Smile
Reply
#7
Thats the M10 one, the M7 ones are part no; 102167

Chris
Membership Secretary DOC UK
2021's DeLorean event: http://www.deloreans.co.uk/forum/showthr...p?tid=6056
VIN#15768 Ex VIN#4584
Reply
#8
Sorry Mike,

Its item 48 on the cylinder head page. Number as per chris's post.

Sill cheap at $3.95 (2 quid)

Best Regards
D
VIN 4532

DOC-574
Reply
#9
I think the exhaust studs are different threaded, m7 to engine block and m10 for manifold nuts.

Item 18 in diagram.

NickT
Reply
#10
I would recommend 4 studs per port as you don't want any leaks... I'm talking from experience although my system is a different design.
Regards,

Chris Hawes
DOC 138
Ex owner of VIN 5255 Grey, 5-speed
Reply
#11
I'm trying to remember where mine came from - I *think* they came from
KMI in London as part of all the headgasket kit - I'm pretty sure they
relate to a Volvo 760 anyway, so it might be worth having a word with your
local Volvo specialist/dealer perhaps???
Claire Wright  - Club Treasurer
Jul 1981 DeLorean - Flopsy #2292 
Aug 1989 Cavalier 1.6L - Guinney
Apr 2021 Mokka-e Launch Edition - Evie
#170
Reply
#12
[Image: P5150002.jpg]
Mike, on the right are the manifold to cross over pipe studs (M10) on the left are the Head to manifold studs (M7) 102167

Chris
Membership Secretary DOC UK
2021's DeLorean event: http://www.deloreans.co.uk/forum/showthr...p?tid=6056
VIN#15768 Ex VIN#4584
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)