+- The DeLorean Owners Club UK Forum (http://www.deloreans.co.uk/forum)
+-- Forum: GENERAL DELOREAN DISCUSSION (http://www.deloreans.co.uk/forum/forumdisplay.php?fid=2)
+--- Forum: DeLorean Cars or Parts For Sale or Wanted (http://www.deloreans.co.uk/forum/forumdisplay.php?fid=26)
+--- Thread: Grey seat cover wanted (/showthread.php?tid=1537)
Grey seat cover wanted - Stuart Rees - 07 May 2008
Hi all,
My drivers side seat base has seen better days, but the rest of the interior is in pretty good shape.
I'm looking for someone who has a used / but good condition grey cover for the seat base. If you've recovered your seats with new skins your old passenger seat cover may be okay for my drivers seat.
Thanks,
Stu :wink:
- stevie67cars - 07 May 2008
Has Chris P not got NOS seat bases left or are they all gone?
They were very reasonable-that's where I got mine.
Stephen
#10213
- Stuart Rees - 08 May 2008
What I was thinking was if I get a good used one it will match the rest of the interior. A new one is a different shade & mine have 'weathered' if you know what i mean. One day I'll probably splash out on new covers
Cheers,
Stu
- Bandit - 08 May 2008
Hi Mate Not sure when I will get round to changing mine, but I've had new covers with all the rest of my parts for the restoration. You are welcome to have my old one when it comes off. Just drop me a PM as a reminder & I will keep in in my 'inbox' that way when I do 'em I will remember to tell you
Julian
- Stuart Rees - 08 May 2008
Cheers Julian, much appreciated. Are you replacing with NOS or DMCH seat skins?
Stu
- Bandit - 08 May 2008
Yeh, they are DMCH, I've had a load of stuff off them for my re-build, top & bottom ball joints, wheel brg's, suspension bushes, brake master cyl, wheel centres, side marker lights, steering UJ, trailing arm bushes & bolts, A.R.B bushes plus the seat covers. On top of that I've had a set of Spax, 4 new Pirelli's, head light switch, all new braided stainless brake pipes through-out, from front to back, every bracket, bolt & washer, re-plated, new euro-height front springs, plus the chassis & all suspension parts shot blasted & re-powder coated. So when its back together, it had better look good, or I may go into one of my sulks!
- TheOriginalMrP - 08 May 2008
Bandit Wrote:Yeh, they are DMCH, I've had a load of stuff off them for my re-build, top & bottom ball joints, wheel brg's, suspension bushes, brake master cyl, wheel centres, side marker lights, steering UJ, trailing arm bushes & bolts, A.R.B bushes plus the seat covers. On top of that I've had a set of Spax, 4 new Pirelli's, head light switch, all new braided stainless brake pipes through-out, from front to back, every bracket, bolt & washer, re-plated, new euro-height front springs, plus the chassis & all suspension parts shot blasted & re-powder coated. So when its back together, it had better look good, or I may go into one of my sulks!
You've just scratched the surface then Ju!
Hope it all goes back together well for you!
Ben
- Bandit - 09 May 2008
Yeh, lets hope so, if all goes to plan, you'll all see it at eurotec! Pinkies crossed.